The Powrcompact Mover fits the majority of small compact UK manufactured caravans including most Fold Downs/Pop ups and Camping Trailers. Under ideal conditions it is expected that this model will move a 1200 kgs (approx 1.2 UK tons) caravan up a 1 in 4 slope.

DIY Price £825.00 \ Fitted Price £925.00

If booked with a full service £875.00 

The Powrtouch Heavy Duty caravan mover is designed to fit caravans that have shock absorbers fitted or have a narrow gap (less than 105mm or 4.125 ins) between the chassis and the tyre, but fitted with a reduction gearbox to provide more moving power to the caravan wheels. Under ideal conditions it is expected that this model will move a 1500 kgs (approx 1.5 UK tons) caravan up a 1 in 4 slope.

This is the most powerful single axle caravan mover on the market.

DIY Price £845.00 \ Fitted Price £945.00 

If booked with a full service £895.00 

The Standard Powrtouch Twin Axle caravan mover drives two wheel only, this model is the only one recommended to be fitted behind the rear wheels; the reason for this is to obtain the best possible turning performance that is achieved, by slightly lifting the jockey wheel it is expected that the caravan will turn quicker. This model will fit the majority of twin axle caravans up to a recommended 1700 kgs (MTPLM)

DIY Price £1,135.00 \ Fitted Price £1,245.00 

If booked with a full service £1,195.00  

The Powrtouch All Wheel Drive Twin axle caravan mover (developed from the Powrlaunch) drives all four wheels of the caravan; this model is required where the twin axle caravan is over 1700 kgs (MTPLM). This may be used on a steep slope, turning uphill or on uneven ground (where the drive wheels may lift off the ground). This model will fit the majority of all twin axle caravans. When fitting this mover special attention should be paid to heating and water pipes as they can interfere with the fitting and may need to be moved by an approved caravan dealer.  

DIY Price £1,700.00 \ Fitted Price £1,825.00 

If booked with a full service £1,775.00  

The Powractuator is a 12 volt linear actuator that replaces the over-lock CAM system for engaging and disengaging the Aluminium rollers to the tyres. As some existing parts are removed the new Powractuator does not add any weight to the existing Powrtouch mover.

The drive rollers can be positioned on or off the tyres by a simple press of a switch.

Should you have a battery failure when the rollers are located on the tyre, they can be removed by turning a small shaft by hand (9mm Hex) or with a battery operated tool (not supplied) 

With Mover £195.00 \ DIY Retro £225.00 \Fitted Retro£295.00

ALKO Spare Wheel Carrier Moving System (WEB/AWC) 

When the installation of the Powrtouch is required to be behind the caravan wheels or fitting the All Wheel Drive Powrtouch (Model 6) the under slung ALKO spare carrier will interfere with the Powrtouch Mover. We can supply and fit a Powrwheel Limited designed kit that allows the ALKO spare wheel carrier to be re-sited. This requires no drilling of the ALKO Chassis. The kit can be also be fitted to BPW chassis but the BPW spare wheel carrier will have to be replaced with and ALKO carrier. 

DIY £35.00 \ Fitted Price £50.00